DCN-16U Digital subscribers exchange unit

Download image

Parameter

Value

Rated voltage

48 V

Supply voltage range

from 36 to 60 V

Consumption power, at most, (excluding phantom supply)

20 W

Electrical protection class (under GOST IEC 61140-2012)

III

Climatic category according GOST 15150-69

NF4.1

Protection degree provided by shells (under GOST 14254-2015)

IP20

Seismic resistance category (under NP-031-01)

Safety Class (under NP-001-15)*

3H (Normal)

Ambient air permissible temperature range

from -5 to +55 ºC

Atmospheric pressure

from 84 to 106,7 kPа

Relative air humidity at 25 °С

up to 80 %

Dimensions, maximum

483×227×44 mm

Weight, maximum (excluding the weight of DCN-16U subscribers’
connection cable and the weight of connection cable via E1 DCN-Q4E)

2,5

Maximum number of switched subscriber devices

* The product conformity with Safety class 4H under NP-001-015 is admitted.

DCN-16U digital subscribers exchange unit is designed for operation as a part of DCN digital Intercom and PA/GA system on the basis of DCN-2 or DCN-Q4E switching processor module and provides for interfacing with digital subscriber equipment by Uk0-interface. DCN-16U transmits digital data between 15 subscriber Uk0-interfaces and E1 line of a central exchange unit. In addition, there is a version of DCN-16U with built-in DCN-Q4E switching processor module.
DCN-16U allows connection of desktop and wall-mounted digital intercom stations, at a distance of up to 6 kms.
DCN-system has improved high speech bandwidth – 6.8 kHz. It has improved speech clarity and makes it possible to use equipment in noisy areas.

Connection of up to 15 digital subscriber devices to DCN system by the digital two wire subscriber interfaces Uk at a distance of max. 6 km;
Local control and diagnostics using two-colour LED indication on the front panel of subscriber interface and E1 line status;
Creation of low capacity DCN system (up to 15 digital subscribers, expandable up to 60 subscribers when connecting additional DCN-16U), for a version with DCN-Q4E module;
“Phantom” power supply of subscriber units by Uk0-interface line;
DIN41612С socket for connection of digital subscribers, a group of phantom power fuses, strip of jumpers for power supply to subscriber units;
DRB-25FA socket for 4 E1 lines connection cable of DCN-Q4E module, if installed, on the back panel;
The connection cable is equipped with screw terminals for connecting lines of subscriber Uk0-interfaces that are located on a DIN-rack mountable board. There are failure signal relays on the cable board.

DCN-16U Digital subscribers exchange unit

Get documentation